January Masthead
Welcome to The Windham Weaponry Newsletter - Issue 2 / Vol. 1
January 2013

From the onset, Windham Weaponry has had one goal: to build the finest AR-type rifles in the country.  We have reassembled a team of the finest firearms people in the USA, who offer many years of experience in the industry and have built "America's rifle" for literally two decades. 

 

We are so sure of the quality of our rifles that we back them up with a Transferrable Lifetime Warranty. We all look forward to working with you, to serving your needs and to building you a great rifle.

     

We welcome you and encourage you to give us feedback about what you'd like to hear and see from Windham Weaponry. Please feel free to contact us through  www.windhamweaponry.com, or newsletter@windhamweaponry.com.  We'd love to hear from you! 

 

Shoot Safely!...

The Windham Weaponry Team

Windham Weaponry Logo

Exhibiting at the SHOT Show in Las Vegas

Shot Show Booth

Mark E Newsletter

MARKETING NEWS

Mark Eliason

VP of Sales & Marketing

 

Windham Weaponry was at the SHOT Show in Las Vegas from Jan 15th to 18th. While there, we presented a large check to the Paralyzed Veterans of America Outdoor Recreation Heritage Fund.

 

Presenting PVA Check

 

This check - for a total of $90,260.00 - represents a $5.00 contribution from Windham Weaponry matched by a $5.00 contribution from Cabelas for every gun sold in the Cabelas chain in 2012. We were pleased that we could offer so much help to this worthy organization. Learn more about them at:
 

    http://www.youtube.com/watch?v=9mgAsgZryd4

 

Windham Weaponry seen Worldwide!... We'll be at the IDEX Show in Abu Dhabi, United Arab Emirates if you happen to be in the neighborhood.
  
And don't forget from May 3rd to 5th we'll be at the N.R.A. Show (Booth #5013) in Houston, Texas. Its open to the public and we'd love to see you!
This Month's Featured Rifle...
Windham Weaponry MPC California Model 
...with a "Bullet Button" for Magazine removal
Model: Windham Weaponry MPC-CA (Designation: R16A4T-CA)
Caliber: .223 Rem. / 5.56mm NATO

Type:  Rifle - Semi-Automatic, Gas Impingement System

Capacity: 10 + 1 ( ships with one 10 Round Magazine - requires tool for magazine removal)

Receiver:  M4A4 Type Flat Top Upper Receiver with A4 Detachable Carry Handle

Bolt:  Carpenter 158 Steel

Barrel:  16" Heavy Profile - Chrome Lined with A2 Flash Suppressor 

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel with M4 Feed Ramps

Rifling:  1 Turn in 9" - Right Hand Twist

Rear Sight: A4 Dual Aperture Elevation & Windage Adjustable: 300-600 M

Front Sight: Adjustable Height Square Post in A2 Standard Base

Includes: Hard Plastic Case, Web Sling, 10 Rd. Magazine, Operators Manual, Lifetime Transferable Warranty

FROM THE GUNSMITH'S BENCH 
Erik at his bench
Erik Winter, Gunsmith

TOPIC:  Removal & Reinstallation of the Rear Sight Aperture
 

For people who want to change out the rear aperture in their A4 carry handle, I have outlined here how to properly do so. Some people like to replace the rear aperture with a tritium night sight for low light shooting conditions. In these instructions I have simply taken apart and reinstalled the stock aperture, but the directions are the same when reinstalling a tritium night sight. 

 

Make sure weapon is unloaded. Wear safety glasses. 
 

Remove carry handle from upper receiver. With a small hammer and a 1/16" punch, drive spring pin out about 3/8". 

Drive Spring Pin Out   Punch Drives Pin

Pull out the punch while holding the knob and slowly pull the knob off being careful not to lose the ball bearing and spring in the knob. It's best to hold the assembly so the knob is facing down and pull the carry handle away from the knob. Then gravity will keep the spring from falling out of the knob. The ball bearing itself may be stuck to the base with oil. Place ball bearing on top of spring and set the knob aside. 

Pull Knob Off

Unscrew the aperture screw and pull it out of the aperture and sight base. 

You may now remove the rest of the parts. 

Unscrew Aperture  Rear Sight Parts  

  

Reassembly 

Install the flat spring as shown into rear sight base. 

Install Flat Spring  Flat Spring in Position

Place aperture on top of flat spring as shown and push aperture screw in through the base and the aperture. 

Place Aperture  

With a plastic mallet tap the top of the aperture while pushing on the screw until it enters the hole in the other side of the base. 

Tap Aperture with Mallet

Screw aperture screw in lining up the index mark on the aperture with the middle index mark on the base as shown. 

Align Center Index Mark

Place windage knob back on the aperture screw. Push the knob on lining up the spring pin hole with the hole in the screw. Push 1/16" punch back through the hole in the knob and the screw to hold the assembly together. 

Place Windage Knob  Punch holding Windage Knob

With a 5/64" (No. 2) pilot punch, tap spring pin back into the windage knob. 

Tap in Spring Pin  Drive Spring Pin In Completely 

Re-center the windage knob and you are finished. 

ReCenter Windage Knob
CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

First I want to thank everyone for their patience at this very busy time. We are all working hard to fulfill the needs of our customers.

 

We get a lot of questions about where to purchase our rifles. I would like to clarify the rifle ordering process. We do not sell rifles on our website. The rifle will need to be purchased through your local FFL gun dealer who will order it from one of their distributors.  The lead time on rifles will vary depending on backlog of the distributor.

FROM THE EDITOR

Karen Fogarty, Asst. to VP of Sales & Marketing   

 

CUSTOMER FEEDBACK
 

I have had the joy of owning one of your excellent weapons for over a month now. When I got ""her"" home from the gun store I broke her down for an initial cleaning and I have to admit I am EXTREMELY impressed with the fit, finish and all around craftsmanship that I see in this weapon. I served 23 yrs in the Army and have been thorough my share of M-16's and M-4's and this is by far the BEST AR that I have ever had the pleasure of owning. She shoots dead on (as long as I do my part). I'm constantly telling other shooters to buy one.  "Keep up the great work!!!  Now I need to start to look at your
aftermarket add on's like the ambi-safety (I'm a "southpaw"). Thanks again for putting out a GREAT product!!!  

Joseph B.


Joe Bs Gun  

***************************************************************************************************************************

 

After a very difficult time since the recession really hit my field a  few years ago I finally decided to do something for myself.  After doing without everything but the basics to survive for the past 3 years, I decided to treat myself to your SRC rifle. I wasn't expecting much since it was very reasonably priced, so you can imagine how pleasantly surprised I was when I saw how wonderfully it was constructed and how well it fired. I cannot praise you enough for making such a great product. Please let all your staff know they are appreciated.

I wish I could show my support by purchasing more of your products but with the uncertainty of my career I can only promise you this:  I will tell everyone I know how great this rifle is, I will let all my friends and acquaintances try it and I will post positive reviews on every gun forum that I belong to.  Again, thank you for making such a quality product that a plebeian such as myself can afford.

Steve L.

 

***************************************************************************************************************************
 

What did u do with your AR15 today???

Michael H., Kansas

 

Michael H with Coon  

  
***************************************************************************************************************************
For Newsletter comments or suggestions, contact:
newsletter@windhamweaponry.com
WINDHAM WEAPONRY FEATURED PRODUCTS   
Matt H - Retail
Matt Hasty
Retail Sales Manager
 
TacOps-1 Ambidextrous Charging Handle...

PART NUMBER: 8444517-TACOPS-1

PRICE: $ 74.95

 

MechArmor Defense Systems has developed the TacOps-1 Charging Handle which offers both ambidextrous operation and ease of use with large scopes or other bulky optics. The "T" shaped handles extend farther out from the receiver for quicker grasp and operation, and a patent pending "dual mode" push button latch extends from the rear of the handle for easy right hand operation when shooting from the prone position. A 42% larger heavy duty roll pin is employed to keep the latch tight on the handle and a 7 pound stainless steel latch spring keeps it locked tightly onto the receiver to avoid possible blow back. This quality handle is machined from 7075 billet aluminum with a black hard anodize finish. Made in the U.S.A.

 

Buy It Now

LAW ENFORCEMENT
Todd C

Todd J. Coons, Law Enforcement Sales Manager

 

What's New in LE?

 

As we now enter a new year, it is full steam ahead for the LE Division here at Windham Weaponry. I personally want to thank all of the officers and departments from around the country for your orders and kind words. Your patience during these times is also greatly appreciated.  

 

I have a new assistant, and when I say new, she is new to me, but like most of the Windham Weaponry family, she is not new to the business. I would like you all to welcome Sue Gilbert aboard as she will be my right hand during these busy times.  

 

I have been traveling for most of January and have been to "SHOT Show and Back". The show was great and it was a pleasure to put a face to the names of those that were able to stop by the booth.  I will be at the Maine Association for Police Banquet on January 26th, as well as the Maine Chiefs Convention coming up on February 7th. I know the MAP Banquet is a private function, but for you Chiefs out there, I would love to see you at the Maine Chiefs Convention.

 

 Be Safe,

Todd J. Coons

Meet the WINDHAM WEAPONRY TEAM

Featured Employee: Tammy Hadley Tammy - Portrait

 

Tammy began her career in the gun industry after working several years at Bridgton knitting mill and upon its closure and relocation found herself employed at Bushmaster in the Quality Control Dept. in early 1999. From there she worked her way into outsourcing, where she eventually became the operating Outsource Manager and remained with Bushmaster until the very end before its move in April 2011. After deciding not to uproot her family and take the offered relocation to New York with Bushmaster, and unsure of where life would take her and her kids from that point forward, Tammy was elated when the emails came for the opportunity of going back to work with Richard Dyke and family for the soon to be new company, now known as Windham Weaponry, in the summer of 2011. It is one this employee certainly would not refuse and a blessing to her and family.  Tammy returned with her knowledge of the QC and Outsourcing areas as Quality Control and Outsourcing Manager, and keeps her team of 14 employees on task; from inspecting multiple daily parts, operating and maintaining a  finish grind room, to directing trucks and drivers to and from various vendors throughout New England, dropping off and picking up of various product in process, along with dealing directly with the local outsourcing companies on product flow, expediting and/or any quality issues. Needless to say, this department is very ongoing and demanding, but one she seems to really rather enjoy.

 

Tammy's Family   Otis & Milo - Camping

In her spare time, Tammy very much enjoys her partner of 16 years, along with their blended family of 5 children and their newest addition of a Grandson in December 2012.  She also enjoys taking scenic photos, spending time with her dogs Otis & Milo, taking them out for long walks and camping with them, family and friends in the summer months. Fishing is also a hobby Tammy enjoys, mostly in the summer months, but she does venture out for some ice fishing in the winter months as well.  She also very much enjoys watching her children in their sporting activities.  Both of her sons are very active in baseball from high school into college, along with college basketball, while her daughter plays high school softball and also on the Town team. Tammy strongly feels her biggest accomplishment has been watching her now mostly young adult children graduate high school, 4 of them consecutively over the past 4 years, and helping them finding their way in life, while helping her 2 stepdaughters plan their future, 1 working hard with a beautiful new baby and taking college classes, and her youngest coming up through high school.

n
Windham Weaponry on AR15.com
    We regularly respond to questions and topics on this informative website.

 
Contact Us:
Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900
Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
Sales/Customer Service:
Toll Free: 1-855-808-1888
 
AR15.com Logo
 
Windham Weaponry, Inc. | PO Box 1900 | 999 Roosevelt Trail | Windham | ME | 04062