Welcome to The Windham Weaponry Newsletter - Vol. 3 / Issue 5
May 2014
Marketing News Mark at SFGC
Mark Eliason, VP Sales & Marketing

 

We have added many new models to our lineup since the first of the year and will continue developing new products for our customers. Over the next few months, you will see the

7.62 x 39 and .300 Blackout calibers offered from Windham Weaponry based on the many request we have received.

 

There is a long list of new items in development, so you can expect more exciting introductions from us throughout the year. Thank you for your support!

This Month's Featured Rifle...
Windham Weaponry "SRC-THD" - Designed to be compliant in New York State

 

Model: Windham Weaponry R16M4FTT-NYTHD   Weight: 6.6 lbs. without magazine   Length: 34.75"
Caliber: .223 Rem. / 5.56mm

Type:  Rifle - Semi-Automatic, Gas Impingement System

Capacity: 10 + 1 - Ships with one 10 Round Magazine

Receivers: Forged 7075 T6 Aluminum -  Flat Top Upper Receiver - Hardcoat Black Anodize Finished

Bolt:  Carpenter 158 Steel

Barrel:  16" M4 Profile - Chrome Lined with Crowned Muzzle

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel with M4 Feed Ramps

Rifling: 1 Turn in 9" - Right Hand Twist

Stock / Pistol Grip: Thordsen Stock

Forend: M4 Double Heat Shield Handguards

Rear Sight: None - Ready for optics or other type accessory sights

Front Sight: None - Mil Std 1913 Railed Gas Block  - Ready for accessory sights

Includes: Hard Plastic Carrying Case, Web Sling, Operators Manual, Transferable Lifetime Warranty

 

This unique New York State compliant model is also available with Carbon Fiber Receivers 

 

Model: (R16M4FTT-CF1-NYTHD) 

 

Specs are same as above except for Carbon Fiber Composite Upper & Lower Receivers, and a weight of only 6.1 lbs.

 

FROM THE GUNSMITH'S BENCH
Erik at his bench
Erik Winter, Gunsmith

TOPIC: 

Instructions for installation of the Midwest Industries 4" Handguard Rail

 

    

 

To install rail, first verify that the rifle is unloaded. Then push the takedown and pivot pins out and remove the upper from the lower receiver. Remove handguards per the instruction on page 23 of your operator's manual.

With a pair of needle nosed pliers remove the inner heat shield from the handguard.

 

Place rail in the desired location on the handguard. There are three possible locations you can place it.

 

Place the rail nuts inside the handguard and tighten the screws into them with the Allen wrench provided with the rail kit. There are two lengths of screws. For our stock M4 handguards you will want to use the short screws. You can also use a little blue Loctite on these screws as well to make sure they don't back out.

 

 

You can replace the inner heat shield if desired or leave it out. It is optional. If you put it back in it may be necessary to stake it into place by the plastic tabs or melt the tabs so it stays in place.

 

Reinstall handguards on rifle.

 

This rail is an easy and economical way to allow the mounting of a forward pistol grip, flashlight, bipod mount or any other accessory that will mount to a MIL-STD-1913 rail on your rifle.

 

Here's a link to the Midwest Industries 4" Handguard Rail in our website catalog:

 

http://www.windhamweaponry.com/shopexd.asp?id=330&bc=no#axzz312rMd1KK

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager
 

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

 

This month's question is:

 

People often ask "What is included with a new Windham Weaponry Rifle?"

 

Answer:

 

Standard with every Windham Weaponry Rifle are:

 

1) A yellow chamber plug/safety tool (shown inserted in the rifle). This acts as a safe chamber indicator, and is also handy as a push pin tool for takedown and pivot pins, and can function as a magazine unloading tool.

2) A 52" black nylon web sling - 1 " wide with two black phosphate finished steel buckles

3) A high quality Magazine: 30-Rd .223/5.56 mm caliber for states where they are allowed. 10-Rd. for states with that restriction. For our .308 rifles, a 20-Rd Magpul P-Mag is included, except for states that require a 10-Rd. magazine where that is substituted.

4) A comprehensive, full color Operating/Safety Manual. For .308 rifles, a special insert is included outlining the differences between .308 and .223 models.

5) A catalog of Windham Weaponry models, parts and accessories, which includes complete warranty registration information.

6) All this, and the rifle, are packaged in a hard plastic, foam lined, lockable carrying case.

 

All of these support pieces help you understand why a Windham Weaponry Rifle is the best value on the AR market today.

FROM THE EDITOR

Karen Fogarty, Asst. to VP Sales & Marketing   

  

 
  

 

CUSTOMER FEEDBACK

  

.308 Update from HausofGuns.com

 

Did a bunch more shooting with the SRC-308 today. This pic was 5 shots at 200 meters. 


 ***********************************************************

Had 4 coyotes come into a call last week. Got 3 of them !!!!!!!!!!!!!!!!!! I still love my rifle !!!!!!!!!!!!!!!

 

Roger B.

********************************************************** 

Wish I was closer. The weapon I bought from you, shoots straight and true. I couldn't be more pleased. Pat on the back to your guys. 

 

Ted

********************************************************** 

 

I just wanted to send out a Big Thank You for a 1st. Class operation. Everyone that I have dealt with has been courteous and knowleable. The quality in your products shines through. Also, Please keep the little projects coming in the emails, I look forward to them and have used some as well. Thank You Again.

 

Sincerely,

Joe Y. in N. J.

**********************************************************

 

Dear Windham Weaponry,

 

Just wanted to say y'all make a great product. I purchased the SRC and liked so much I decided to get a VEX. They have both work flawless. I would recommend them to anyone looking for a reliable AR. Got my first coyote last week.

 

Thanks, Wyatt

 

To send Newsletter comments or suggestions, contact:

newsletter@windhamweaponry.com
WINDHAM WEAPONRY FEATURED PRODUCTS
Matt H - Retail
Matt Hasty
Retail Sales Manager

  

14.5" M4 Profile Upper Receiver/Barrel Assembly with Phantom Flash Suppressor

Part Number: UR14M4PHA4B

Price: $695.00

 

This M4 Barreled Upper Assembly is complete and ready to snap onto your Lower.

The highly accurate 14.5" M4 Profile Barrel is Chrome Lined and machined from 4150

Chrome Moly Vanadium 11595E Steel. Rifling is 1 x 9" Right Hand Twist to stabilize

bullets up to 69 grains, and the barrel extension has M4 Feed Ramps. A Phantom Flash

Suppressor is pinned and welded on the muzzle to make a legal 16" length assembly.

A standard A2 Front Sight is fitted. The machined aluminum flat top Upper Receiver is

is complete with Bolt Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover

and Removable A4 Carry Handle with 300-600 meter Dual Aperture Rear Sight.

 

 
As a reminder, from now through May 31st, in Windham Weaponry's Spring Fever Sale, we're offering 10% OFF any Retail Items to all our customers. Additionally, if your order exceeds $100.00, we'll ship it for FREE via Ground Service.

 

As a PLUS, for anyone who has purchased a Windham Weaponry Rifle, and registered its Warranty, if you purchase any Windham Weaponry Complete Upper Receiver Assembly, you'll get that 10% OFF price, and we'll send you a $25.00 Windham Weaponry Gift Certificate. 

 

This promotion is available only to Retail Customers.

  

BUY IT NOW

LAW ENFORCEMENT
Todd C

Todd J. Coons, VP Law Enforcement Sales

 

What's New in LE?

 

The shows we attended in April were great.  The Northeast Fish and Wildlife Conference was very well attended, as was the NRA. 

 

I will be traveling to Mississippi and to Louisiana at the end of May for a couple of LE Demo shoots.  I will be in Tupelo MS on May 19th and in Baton Rouge on the 21st.  I always get very excited to participate in live-fire law enforcement demos, so the end of the month can't come fast enough.

 

I have a few classes coming up as well in the month of June.  The first class will be an armorer's class here at the factory on June 10th/11th.  The second class will be on the road in Pennsylvania at the Lancaster County Public Safety Training Center June 17th/18th.  We will be hosting a special seminar called Advanced Firearm Technology, June 16th/17th here at the factory as well.   For additional information, or to sign up, please visit my website:  http://www.windhamweaponry.com/le/training.asp

 

From May 15th to June 15th I'm going to be offering the R16M4LHRFMFT (pictured below) at a special pricing for active and retired law enforcement and military, along with a FREE aluminum mag.  Please contact me for pricing on the rifle.  Tcoons@windhamweaponry.com

Be Safe,

Todd J. Coons

VP Law Enforcement Sales    

Meet the WINDHAM WEAPONRY TEAM
Featured Employee - Percy Dieppa, Information Technology Manager   

 

Born and raised in San Juan, Puerto Rico, Percy has called Maine his home for the past 24 years. He became involved with the firearms industry back in 1998 when he first joined the original Bushmaster Firearms, Inc. About one week after Bushmaster closed, he received a call from Allen Faraday, Executive VP of Operations of Windham Weaponry, and said "Percy, what do you think about Dick's email"? referring to an email Richard Dyke, CEO of Windham Weaponry had sent the day before where Mr. Dyke was asking some of the old Bushmaster employees if they were interested in joining a new company he was starting. Percy said, "This is crazy, I can't believe Mr. Dyke is getting back into the game" With that said, Percy said yes.  After many months of work to help get the new company started, Percy officially started with Windham Weaponry on February of 2012.

 

As the Information Technology Manager, he keeps busy managing all our computers, software, website, and security systems among many other things. When not fighting with computers, Percy enjoys spending time with his wife of 20 years, their two daughters, and two cats. He enjoys target practice, fishing on Sebago Lake, and camping. Daughters always keep him busy with dance, soccer, gymnastics, and ice and roller-skating.

 

 

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 
Contact Us:
 
Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900
Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
 
Phone Sales/Customer Service:
Toll Free: 1-855-808-1888
 
 
 
Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  www.windhamweaponry.com  or
 
SHOOT SAFELY,
Windham Weaponry Logo
 
Windham Weaponry, Inc. | PO Box 1900 | 999 Roosevelt Trail | Windham | ME | 04062