Welcome to The Windham Weaponry Newsletter - Vol. 3 / Issue 7
July 2014
Marketing News Mark at SFGC
Mark Eliason, VP Sales & Marketing


Windham Weaponry is celebrating the arrival of the Summer months with our Dog Days of Summer promotion. Each week we will feature 7 different items, all at a 20% OFF discount. See www.windhamweaponry.com.


Each week will also feature a beloved Windham Weaponry family pet. Be sure to check out our Meet the Windham Weaponry Team section in this Newsletter, as this month we are featuring all of the dogs you'll see in our Dog Days of Summer promotion. Woof!



This Month's Featured Rifle
Windham Weaponry SRC-308-SS15 
Model: R16SFST-308   Weight: 8.0 lbs. without magazine   Length: 38" (34.175" with Telestock collapsed)
Caliber: .308 Win. / 7.62 x 51mm

Type:  Rifle - Semi-Automatic, Gas Impingement System

Capacity: 20 + 1 - Ships with one 20 Round Magpul PMag Magazine

Receivers: Forged 7075 T6 Aluminum -  Flat Top Upper Receiver - Black Anodize Finished - 2 QD Sling Swivel Sockets

Bolt:  Carpenter 158 Steel

Barrel:  16" Medium Profile - Chrome Lined with BCM MOD 1 Compensator

Barrel Material: 4150 Chrome Moly Vanadium 11595E Steel with M4 Feed Ramps

Rifling: 1 Turn in 10" - Right Hand Twist

Stock / Pistol Grip: WW 6 Position Telestock / Hogue Overmolded Beavertail Pistol Grip 

Forend: Midwest Industries 15" Free Float SS Key Mod Forend w. 2" Rail Segment

Rear Sight: None - Ready for optics or other type accessory sights

Front Sight: None - Ready for accessory sights on Full Length Mil Std 1913 Railed Forend

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty

Erik at his bench
Erik Winter, Gunsmith


How to change a standard rifle stock to a tele stock


First make sure the rifle is unloaded. Then remove the upper from the lower by pushing out the takedown and pivot pins. Put the lower receiver on an AR15 lower receiver vice block and remove the upper rear stock screw with a flat screwdriver. Remove stock body.


Remove takedown pin detent spring from lower and set aside

Remove buffer and spring by pushing down on buffer retainer and releasing the buffer and spring.

Remove both completely from the lower and set aside.


With the cutout portion of the tele stock wrench loosen the buffer tube but don't unscrew it all the way. (If you are not using this style of tele stock wrench simply use an end wrench)

Before doing so make sure you put a thumb over the buffer detent to keep it from shooting out of the lower when you turn the buffer tube all the way off. Release the buffer detent and spring slowly and leave them in the lower.



Screw the tele stock buffer tube all the way in while holding the buffer retainer down with your thumb. Turn the stock in until it stops against the retainer, then back it off until it holds the retainer in, but isn't rubbing on it hard. The buffer retainer should move up and down freely when you press on it.


Stock should be straight with the pistol grip

Reinstall takedown pin detent spring. Make sure it is square against the tele stock endplate and push the spring in then screw the castle nut up against it.


Tighten castle nut down snugly with the wrench. It is also okay to use a little blue Loctite on the threads to keep it from loosening. (Or stake the nut on if you want a more permanent installation. I covered castle nut staking in the May 2013 newsletter.)


Push the carbine buffer and spring that came with the tele stock assembly into the buffer tube and you are done.


To remove a tele stock and install a standard stock assembly you basically just reverse these instructions. The only thing to be mindful of is to back the castle nut off enough to remove the takedown pin detent spring completely before turning the tele stock off so you don't damage it.

Cheryl Eliason, Customer Service Manager

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.


This month's question is:


How do I obtain a copy of your Operators Manual ? 




A PDF copy of our Operating and Safety Manual is available on our website.  Just go to www.windhamweaponry.com  and click on "Media Center" under Misc. you will find the Rifle Operator's Manual.




Here is the link to the pdf: 



You can also request a paper copy by calling Customer Service at 1-855-808-1888 or email us at information@windhamweaponry.com


Karen Fogarty, Asst. to VP Sales & Marketing   







Subject: 100 yard target


I am still getting used to the new gun.


Windham VEX Varmint Package

25 shots;  23 in center with 2 fliers.   A 25 cent piece for comparison.

Target shot on June 11.

Range:  100 yards

Hot, winds calm.  Southern Shooting Center,   Thibodeaux, Louisiana

Fired from heavy cement bench with sand bags.

68 grain Hornady Match bullets

25.0 grains of W 748;  standard Winchester primers

Full length resized;  bullets set with Redding Precision Seater Die.

Scope:  4 1/2 to 14 Leupold Mil Dot 30 m/m/  

The two fliers at 10 o'clock and 5 o'clock were my fault;  probably flinching from other rifles shooting near me.


Overall a good day with the Windham.  


Dan M.  



Subject: Thanks


Dear Windham Weaponry,  


I just wanted to say how much I love my Windham SRC. This is my first rifle and you have set a very high standard for future purchases.  I am looking forward to deer season - its been 30 years since my last hunt. I am even planning a wild boar hunt with my brother in Texas.  My  SRC is the best father's day gift ever!


Alberto in Michigan. 


Very pleased with the SRC I purchased recently.  Very accurate once it was zeroed in.  Spoke with customer service recently regarding some parts and very impressed with your support staff.  


Keep up the great work.  You guys feel like family.


Tim B.

South Carolina


To send Newsletter comments or suggestions, contact:

Matt H - Retail
Matt Hasty
Retail Sales Manager


CMC Tactical Curved Trigger 3.5 Pound Pull Single Stage Trigger for AR platform rifles


Part Number: 8448592-CMC

Price: $179.95


This CMC Tactical Trigger Group is a completely self-contained, 100% drop-in fire control group upgrade for the AR-15, LR-308 and AR-10 rifles. The double patented Tactical Curved Trigger design yields truly remarkable and unprecedented trigger control, trigger feel and accuracy, while also the retaining the rugged reliability of a Mil-Spec trigger group. Trigger pull is factory pre-set to 3.5 pounds (not user adjustable). Fits most standard Mil-Spec lower receivers with .154" trigger and hammer pin holes. This patented one piece assembly installs in minutes - simply insert the one piece assembly and install the supplied anti-walk pins. It is contained in a high grade 410 stainless steel housing with full strength music wire springs for fast lock-time and reliable discharge with factory or military ammo. There are no screws or adjustability in this design - factory tuned for a superior trigger pull with minimum take-up and over-travel. Note: not recommended for use with 5.45 x 39.

Does not fit Colt AR-15 with sear block.




Todd C

Todd J. Coons, VP Law Enforcement Sales


What's New in LE?


June was another great month for Windham Weaponry Law Enforcement Sales. I was able to attend the National Sheriff's Associations Convention in Dallas-Fort Worth. The Convention was awesome and the attendance was as well. I had the opportunity to meet so many Deputies and Sheriffs from all over the country that I have done business with over the past 2 ½ years. So a BIG THANK YOU to all of you that stopped by the booth.


After attending the convention, I headed to Victoria TX to hunt hogs with officers from South Texas. I would like to send out a very special thanks to Gary and Jimmy for making this possible for the second year in a row. Todd from EoTech and Chip from ATN supplied the thermal optics for the hunt and I would like to thank both of them as well. It was a great 3 days of hog hunting as we were able to bag nearly 60 hogs. Sadly, we didn't put a dent in the population, but we sure tried.


Introducing a New AR Pistol Configuration at a Special Price.


From July 16th to August 11th I'm going to be offering the RP11SFS-7 at a special pricing for active and retired law enforcement and military.  Please contact me for pricing on this new pistol configuration.  





Be Safe,

Todd J. Coons

VP Law Enforcement Sales    



To bring attention to our "Dog Days of Summer" Promotion where we're featuring great deals every week through the end of August, we thought we'd give you "previews of coming attractions". These pals will be featured on our website, so check www.windhamweaponry.com every week to see who's barking about the great deals!


Dogs play such an integral part in everyones's lives, and that's no different at Windham Weaponry. At the factory every day, you'll see a number of "dogs in residence", and their canine compatibility keeps things enjoyable for all.


                                "Josie"                                                                         "Charlie"
                    "Rowdy & Shelby"                                                          "Hawkeye"
                                            "Girl"                                                                     "Maddie"
           "Deputy Dawg", "Emily,
                       "Zip" (in back) & "Haley"
Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

Contact Us:
Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900
Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
Phone Sales/Customer Service:
Toll Free: 1-855-808-1888
Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  www.windhamweaponry.com  or
Windham Weaponry Logo
Forward this email

This email was sent to pdieppa@windhamweaponry.com by newsletter@windhamweaponry.com |  

Windham Weaponry, Inc. | PO Box 1900 | 999 Roosevelt Trail | Windham | ME | 04062