October Masthead
Welcome to The Windham Weaponry Newsletter - Issue 1 / Vol. 5
October 2012

From the onset, Windham Weaponry has had one goal: to build the finest AR-type rifles in the country.  We have reassembled a team of the finest firearms people in the USA, who offer many years of experience in the industry and have built "America's rifle" for literally two decades. 

 

We are so sure of the quality of our rifles that we back them up with a Transferrable Lifetime Warranty. We all look forward to working with you, to serving your needs and to building you a great rifle.

     

We welcome you and encourage you to give us feedback about what you'd like to hear and see from Windham Weaponry. Please feel free to contact us through  www.windhamweaponry.com, or newsletter@windhamweaponry.com.  We'd love to hear from you! 

 

Shoot Safely and Take Care...

The Windham Weaponry Team

Windham Weaponry Logo  

Mark E. at Flintoak

MARKETING NEWS

Mark Eliason

VP of Sales & Marketing

 

I, and my assistant Karen, attended the Kansas Salutes the Troops event held at Flint Oak the weekend of October 6 and 7.  I have seen firsthand how important these programs are to our veterans, and would like to thank all those involved.  The PVA-ORHF is a wonderful program made up of caring people that show the respect our troops deserve.  Please see the links below to see what this is all about.

 

http://www.kansas.com/2012/10/07/2517284/hunting-weekend-a-salute-to-wounded.html

 

http://blogs.kansas.com/outdoors/2012/10/08/looking-back-on-kansas-salutes-the-troops/#respond

A Carbine with Sighting Options... 
The Windham Weaponry MPC with Diamondhead Rear Flip Sight
MPC with Rear Flipsight
Model: MPC-RF (Designation: R16M4LHRFT)
Caliber: .223 Rem. / 5.56mm NATO

Type:  Rifle - Semi-Automatic, Gas Impingement System

Capacity: 30 + 1 ( accepts all standard capacity magazines)

Receiver:  M4A4 Type Flat Top Upper Receiver with removable Diamondhead Rear Flip Sight

Bolt:  Carpenter 158 Steel - Magnetic Particle and High Pressure Tested

Barrel:  16" Heavy Profile, Chrome Lined with A2 Flash Suppressor

Rifling:  1 Turn in 9" - Right Hand Twist

Sights: Rear: Diamondhead Flip Sight

              Front: Adjustable Height Square Post in A2 Standard Base

Includes: Hard Plastic Case, Web Sling, 30 Rd. Magazine, Operators Manual, Lifetime Transferable Warranty

FROM THE GUNSMITH'S BENCH         Erik at his bench
Erik Winter, Gunsmith

TOPIC:  Choosing Iron Sights for the SRC

  Same Plane Sights

When choosing iron sights for the SRC rifles, it is important to make sure you get the correct height front sight. Most manufacturers of rail mounted iron sights make two different heights for the front sight. With the SRC (and VEX rifles) you have to make sure you get a front sight that is for "same plane" sighting. In other words it has to be the same height as the rear sight that is mounted to the picatinny rail on the upper. Some confusion comes in here when you see a company that offers a "Gas block height detachable front sight". Right now we are one of the only manufacturers that make an AR15 in which the picatinny rail on the gas block is on the same plane as the upper receiver. Most company's gas blocks have rails that are lower than the rail on the upper. Front sights for these rifles have to be made taller to make up this difference in height. So what happens if you mount one of these taller front sights on an SRC is your rifle will end up shooting way too low and you cannot move the front sight post down far enough to get the gun on target. 

Below is approximately what the measurement is supposed to be for the front and rear sights. Note that is has to be the same or at least close to this measurement for both sights.

 

Rear sight, approximately 1.440" from top of rail to aperture: 

           Rear Sight Height

 

Front sight, approximately 1.440" from top of rail to top of front sight post:

CUSTOMER SERVICE CORNER         Cheryl E
Cheryl Eliason, Customer Service Manager

I receive a variety of customer service related questions from our customers, and in order to better serve all of you, I will begin highlighting one question each month.

 

This month's question is: 

 

Q:  Can I ship my rifle to you or do I need to take it to my dealer ?

 

Answer:  Yes, you can ship your rifle to us for service and we can ship back to you. We do recommend that rifles be fully insured when you ship to us. If the entire rifle or serialized lower is sent to us, then we will require an adult signature when it is shipped back to you. If the rifle is sent in from your FFL dealer, then it will be shipped back to the dealer.

 

FROM THE EDITOR

Karen Fogarty, Asst. to VP of Sales & Marketing   

 

As Mark Eliason, our VP of Sales & Marketing talked about this month, I had the honor and privilege to attend the  Kansas Salutes the Troops 2012 event at Flint Oak.  Participating in the European pheasant hunt and clay shooting was a great experience, but more amazing was the opportunity to meet, spend time with and get to know the veterans at this event who were the guests of honor.  To be able to talk with them and have them share their personal stories was truly an honor.  We also shared a lot of laughs.  Seeing first-hand the caring and camaraderie that developed among the veterans, sponsors and amazing people from the PVA-ORHF over the weekend is something that I hold dear to my heart.  We made many new friends and look forward to continuing to support and take part in such a worthwhile and important program.  Thank you to all of the veterans, sponsors and the team from of PVA-OHRF for allowing me to be a part of such a special event.  I would also like to thank the staff at Flint Oak, who were warm, welcoming and great hosts.  I have shared a few pictures from the weekend, and hope you have the chance to read the news stories from the event to get a broader sense of what this event was all about. 

  Flintoak Group1

Mark at Flintoak Karen Takes A Shot...  

Karen - Successful Hunter... Flintoak Group 2  

**************************************************
For Newsletter comments or suggestions, contact:
newsletter@windhamweaponry.com
WINDHAM WEAPONRY FEATURED PRODUCTS   
Matt H - Retail
Matt Hasty
Retail Sales Manager
FIELD REPAIR KIT FOR AR15 / M16...

PART NUMBER: KIT-FIELDREPAIR

PRICE: $34.95    

This kit is designed to provide every part you would need to keep your rifle fully functional in the field - the perfect emergency selection to stow in your rifle case! All are top quality Windham Weaponry parts including: an M16 Firing Pin; a Firing Pin Retaining Pin; Bolt Cam Pin; Extractor Cartridge; Extractor Pin; Extractor Spring; Extractor Spring Insert; Extractor O-Ring; a set of 3 Bolt Gas Rings; Hammer and Trigger Springs; Disconnector Spring; Hammer and Trigger Pins; a Front Sight post (taller .040" height); an A1/A2 Front Sight Adjusting Tool and a CP-02 Chamber Plug/Safety Tool. Never be without that critical part to keep your rifle firing! 

Field Repair Kit  

Buy It Now

 

TACOPS-1 AMBIDEXTROUS CHARGING HANDLE FOR AR15 / M16... 

PART NUMBER: 8448517-TACOPS-1

PRICE: $84.95

MechArmor Defense Systems has developed the TacOps-1 Charging Handle that offers both ambidextrous operation and ease of use with large scopes or other bulky optics. The "T" shaped handles extend farther out from the receiver for quicker grasp and operation, and a patent pending "dual mode" push button latch extends from the rear of the handle for easy right hand operation when shooting from the prone position. A 42% larger heavy duty roll pin is employed to keep the latch tight on the handle and a 7 pound stainless steel latch spring keeps it locked tightly onto the receiver to avoid possible blow back. This quality handle is machined from 7075 billet aluminum with a black hard anodize finish. Made in the U.S.A.

  TAC-OPS Charging Handle

Buy It Now 

LAW ENFORCEMENT
Todd C

Todd J. Coons, Law Enforcement Sales Manager

 

I would like to start this month by personally thanking the hundreds of Police Officers, Customs Agents, U.S. Marshals, Border Patrol Agents, Deputy Sheriffs, Troopers and all others in Law Enforcement that have purchased a Windham Weaponry rifle. There is no better way to spread the Windham Weaponry story than by word of mouth from those on the front lines. I truly believe that is the reason Windham Weaponry products are now in over half the states in the country in the hands of sworn Officers.

 

This month I traveled to Richmond, Virginia to display just some of what Windham Weaponry has to offer. I had the pleasure of meeting Officers from the Virginia Department of Corrections, Sheriffs from several of the neighboring communities, the Virginia State Police and many municipal officers from area departments. Many had heard of the Windham Weaponry story, but many had not. So, it was not just an opportunity to spread the word, but also it was a chance to get some great feedback from some of the guys and gals on the front line.

 

One of the great things for me here at WW is the fact that we listen to what those on the front line need.  I have been able to take some of those suggestions and get them to the drawing board in hopes of getting the product that is needed out there for them to do their jobs. We don't just say that we produce the right tool for the job, we mean it.

 

Have a Great Day and Be Safe,

Todd J. Coons

Windham Weaponry Law Enforcement Sales Manager

Meet the WINDHAM WEAPONRY TEAM

 

Featured Employee: DOUG PRICE, Production Manager

 

Doug is known and respected for being a top-notch production manager, who, on numerous occasions has led his team to produce quantities of rifles from our small factory that seem unheard of. We all appreciate his vast knowledge of the AR platform - he knows these weapons inside and out and has a keen sense for what will work and what will not when developing new products, attending shooting events and industry tradeshows. Doug's ability to keep his line running smoothly, but also creating an atmosphere of teamwork, family and pride is no small feat, but he makes it look easy. On any given day, you hear laughter and see smiles among his team. His team spirit and caring are contagious. 

 

Doug began his firearms career in 1992 joining Bushmaster's production assembly, where he quickly proved to be a key team player and with his knowledge and drive, was asked to take on the role of Production Manager in 1999. He continually improved the production process in that capacity until the close of the Bushmaster plant in 2011. In 2011, Doug joined the WW team as our Production Manager, and once again has taken his team to new heights we only dreamed were possible. 

 

In his spare time, Doug is an avid motorcyclist, plays professional billiards, enjoys 4-wheeling and spending time with his family and sidekick, Bridget the beagle. 

 

Doug Biking   

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.

 
Contact Us:
Windham Weaponry, Inc.
999 Roosevelt Trail
P.O. Box 1900
Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623
Sales Toll Free: 855-808-1888
 

 

 

 
Windham Weaponry, Inc. | PO Box 1900 | 999 Roosevelt Trail | Windham | ME | 04062