March Masthead
Welcome to The Windham Weaponry Newsletter – Vol. 3 / Issue 3
March 2014


Marketing News Mark at SFGC


Mark Eliason, VP Sales & Marketing

Our Featured Rifle is the next in our new VEX Wood Stocked series.


The Nutmeg laminated wood stock and forend are enhanced by the beautiful Coyote Brown anodizing on the upper and lower receivers. This new series of Varmint Exterminator rifles is designed for those who want to get away from the traditional black AR-type rifle. While we’ve radically enhanced its appearance, the Nutmeg incorporates all of the accuracy of our 20″ fluted, matte finished, stainless steel barrel and matched bolt. With its 5-round magazine, this rifle is ready to add your favorite scope or optic and go out after the pesky woodchuck that’s made Winter hang around so long!

Don’t forget to take advantage of our Tax Time Sale – running until April 15th.



When you are on the Windham Weaponry website


Be sure to check out our new “Special Build” Program. See:


This program allows you to choose from almost any of the accessories or configurations we offer to build your dream rifle -directly from the Factory to your FFL dealer. Visit your local FFL Dealer and inquire about Windham Weaponry’s Special Build Program – for a rifle designed by you – just for you!

This Month’s Featured Rifle
Windham Weaponry VEX Wood Stocked Series – Nutmeg
The next in the VEX Wood Stocked Series – Featuring Coyote Anodized Receivers
and Laminated Nutmeg Finished Wood Furniture 


Nutmeg Woody


Model: Windham Weaponry R20FSSFTWS-2   Weight: 8.35 lbs.   Length: 38.1875″

Caliber: .223 Rem.


Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 5 + 1 – Ships with one 5 Round Magazine (accepts all standard sizes)

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver – Coyote Anodize Finished


Bolt:  Carpenter 158 Steel – matched to barrel

Barrel:  20″ 416R Stainless Steel – Fluted – Mate Finished with Sling Stud on Picatinny Gas Block

Barrel Material: Precision 416R Stainless Steel

Rifling: 1 Turn in 8″ – Right Hand Twist

Stock /Forend: Laminated Wood – Nutmeg Finish


Pistol Grip: Hogue OverMolded Rubber Pistol Grip with Finger Grooves

Rear Sight: None – Ready for Optics of Choice on Picatinny Rail Platform

Front Sight: None – Ready for Accessory Front Sights 

Includes: Hard Plastic Carrying Case, Web Sling, Operators Manual, Transferable Lifetime Warranty


Erik at his bench
Erik Winter, Gunsmith


How to Install a POF Single Stage Drop In Trigger

This is a long piece with 19 Photos, so go to WW Technical Paper – POF Drop In Trigger to download the complete instructional article.

POF Drop In Trigger


Cheryl Eliason, Customer Service Manager

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.

This month’s question is:


What does the warranty on my Windham Weaponry rifle cover ?





Our Windham Weaponry Transferable Limited Lifetime Warranty covers any defects in material or workmanship which affects operation of your rifle.

If you are having any trouble with your rifle or specific questions please give us a call. We may be able to trouble shoot it over the phone for you and if the rifle needs to come back for service we will make arrangements to get it back here for evaluation. Your Windham Weaponry rifle’s warranty is also transferable, if you should decide to sell it or pass it on to a member of your family.

Click here to view Windham Weaponry Warranty Certificate:



Karen Fogarty, Asst. to VP Sales & Marketing








When I first decided to invest in an AR-platform firearm, the search was on for a quality firearm without breaking my budget. I looked at and handled a number of firearms, but the SRC was my final choice. It is coming into its own with me and has begun to develop its own personality. Your customer service is excellent and I was impressed by the well-illustrated owner’s manual. I have been planning on purchasing another WW in .223/5.56×45 and in .308/7.62×51 as soon as I can free up available funds. I am intrigued by your new “wood furniture” versions. I am an old-school shooter and wood furniture will always have a warm place in my heart.

1967 marked the first year that I was “introduced” to the M16 while having to give up a beloved M14 at the time. Sadly, I was not impressed with the M16. Thankfully, times have changed and it took quite a long time for me to succumb to the desire to own an “AR”. When I had a chance to handle the WW SRC at my local gun shop, and while there was many others priced both above and below the SRC, it was the one that came home with me.

The SRC (now known as Caleb) allowed me to experiment with sighting systems and I finally came up with a combination that works for me; the UTG rear sight w/flip front sight and the UTG CQB red/green dot sight that allows me to co-witness both front and rear sights. Additionally, a Barska 3x9x42 Gen2 Sniper tactical scope and a Redfield 3x9x42 Combat Zone scope is ready to attach at a moment’s notice. The accessories may not be high-priced but they work for me.


The last range session resulted in this 1.5″ group with the red/green dot sight and the standard trigger. Hopefully, I can tighten that group a tad with some minor trigger work. Not bad for an almost 65-year old guy.


I enjoy the newsletter and I am in the process of smoothing out the trigger on my SRC based on the article in January’s newsletter. My first AR-based firearm was from Windham Weaponry and I see no reason to change that for future purchases. You have done well, grasshoppers!

Best regards,

Daryl D.


Hi, I just rolled into town grinning after taking my first hog with my Windham AR! Just thought I’d share my pic and how much I’m enjoying your product down here in Texas!


Robert B.

Benbrook, TX



To send Newsletter comments or suggestions, contact:




Matt H - Retail
Matt Hasty
Retail Sales Manager



A2 Gov’t. Profile 20″ Barrel Kit for AR15 / M16



Part Number: KIT-BA20GVT-7

Price: $270.00


This A2 Gov’t. profile barrel kit – with all parts forward of the Upper Receiver – is ready for your next target or service rifle build. The highly accurate 20″ barrel is chrome lined and machined from 4150 Chrome Moly Vanadium 11595E steel is rifled 1 x 7″ – right hand twist. The barrel is finished in Black Manganese Phosphate for protection against rust and corrosion. A standard A2 Front Sight Base with sling swivel is fitted. Kit includes A2 Flash Suppressor, Barrel Nut, Crush Washer, Delta Ring Kit and Rifle Length Gas Tube. Rifle Length Handguards are also included. These are premium quality parts molded from a fiberglass composite for heat resistance in sustained fire – they will not deform when subjected to high barrel heat.

Govt 20 Bbl Kit  



A2 Gov’t. Profile 20″ Upper Receiver/Barrel Assembly* for AR15 / M16

Part # UR20GVTA4B-7

Price: $ 690.00

This A2 Gov’t. profile barreled Upper Assembly is complete, ready to snap onto your lower and take to the range. The highly accurate 20″ barrel is chrome lined and machined from 4150 Chrome Moly Vanadium 11595E steel rifled 1 x 7″ RHT. An A2 Flash Suppressor, and standard A2 Front Sight are fitted. The assembly includes premium quality, rifle length handguards molded from a fiberglass composite for heat resistance in sustained fire – they will not deform when subjected to high barrel heat. The machined aluminum flat top Upper Receiver is complete with Bolt, Bolt Carrier Assembly, Charging Handle, Forward Assist, Ejection Port Cover, and Removable A4 Carry Handle with 300 – 600 meter Dual Aperture Rear Sight adjustable for windage and elevation.


Govt 20 Upper Assy  

*We also have additional upper receiver assemblies available, call our sales department, toll free at 855-808-1888, for more details.




Todd C

Todd J. Coons, VP Law Enforcement Sales

What’s New in LE?


The Law Enforcement sales here at Windham Weaponry have been AMAZING this year. We have been able to do many custom builds for agencies all over the country and the word is spreading fast on what we can do. So, if your department is looking for a special rifle configuration. please reach out to me directly and let me see what we can build for you.

Our armorer’s class this month was at capacity! With 24 students in attendance it was the largest class we have had at the facility. It was a huge success with students from Maine, Massachusetts, New Jersey, New York and New Hampshire. I have included some photos taken during the class.

Our next class will be here at the factory June 10th/11th. For information on the next class, you can contact me or keep an eye on the website at

Be Safe,

Todd J. Coons

VP Law Enforcement Sales    

Featured Employee – Crystal Ward  

Crystal joined the Windham Weaponry team in February 2013, working in our maintenance department. She also pitches in wherever she is needed, and from time to time can be found working in our production department. Her positive attitude, sense of humor and smile make her a great part of the team.

Crystal lives in Windham with her husband, Jason, and their two daughters, Clara and Emma. When she’s not at work, she is normally sitting on the sideline of her daughters soccer, basketball or lacrosse games, as well as cheering on her husband in the Car Wars series at the local short track, Beech Ridge Motor Speedway. She is part of the New England Ghost paranormal investigation team, which investigates paranormal activity throughout the State of Maine. She is also known as “Sgt. Tank” as a member of the Derby Lite roller derby exercise classes.



Windham Weaponry on Logo
    We regularly respond to questions and topics on this informative website.


Contact Us:


Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900


Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623


Phone Sales/Customer Service:
Toll Free: 1-855-808-1888




Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  or


Windham Weaponry Logo