Welcome to The Windham Weaponry Newsletter – Vol. 4 / Issue 7
July 2015


Marketing News Mark at SFGC


Mark Eliason, VP Sales & Marketing


Summer is here and we’ve “cooked up” a special Summer “Grillin’ & Chillin” promotion that is sure to serve you some good deals on Windham Weaponry parts and gear, as well as prepare you for your next creative effort on the home BBQ grill.

We will take 10% OFF any Windham Weaponry retail order for parts or accessories and if your order is $50 or greater, we will ship it to you for free via FedEx Ground (which sometimes includes delivery by USPS).

Also, just so we can all share, we invite you to go to:  http://www.windhamweaponry.com/bbq  to download some of our favorite grilling recipes to make your summer grilling a great success. We encourage you to share your recipes, pictures, ideas, etc. about what makes great grilling – ’cause we’re all one big family, right?  So go to bbq@windhamweaponry.com to share your favorite summer grillin’ recipes and pictures of your grill/BBQ’s.

As always, shoot safely and feel free to contact us with any AR related questions.


This Month’s Feature:
Windham Weaponry .308 SRC “Compliant” Model Rifle

A .308 available for Massachusetts & New Jersey, and other States with stringent regulations on stocks, magazine capacity, etc.
Model: R16FTSK-308-MA   MSRP: $ 1442.00

Weight: 7.55 lbs. without magazine  Length: 38″ overall

Caliber: .308 Win.


Type:  Rifle – Semi-Automatic, Gas Impingement System

Capacity: 10 + 1 – Ships with one 10 Round Magpul PMag Magazine

Receivers: Forged 7075 T6 Aluminum –  Flat Top Upper Receiver

Receiver Finish: Hardcoat Black Anodize Finish


Bolt:  Carpenter 158 Steel

Barrel:  16.5″ Medium Profile with welded compliant compensator

Barrel Material: 4150 ChromeMoly Vanadium 11595E Steel

Rifling: 1 Turn in 10″ – Right Hand Twist 

Stock: Skeleton Stock with Sling Swivel

Forend: Midlength Tapered Shielded Handguards

Pistol Grip: Hogue Overmolded Rubber Pistol Grip


Rear Sight: None – Ready for optics or other type accessory sights 

Front Sight: None – Mil Std 1913 Railed Gas Block ready for accessory sights

Includes: Hard Plastic Carrying Case, Black Web Sling, Operators Manual, Transferable Lifetime Warranty


Erik at his bench
Erik Winter, Gunsmith
TOPIC: Installing the Magpul B.A.D. Lever



First make sure rifle is unloaded and remove receiver from the lower.
Place the lever over the bolt catch

Place backing plate behind the bolt catch

Install and tighten screw with provided Torx wrench.


You can now engage and disengage the bolt catch with your trigger finger for rapid operation of the bolt catch. (Note that this lever only works on standard AR15s. Not designed to work on a .308 platform)

This Magpul B.A.D. lever is available at www.windhamweaponry.com  or click this link:



Cheryl Eliason, Customer Service Manager

We receive a variety of customer service related questions from our customers, and in order to better serve all of you, highlight one question each month.


This month’s question is:

How do I locate a Windham Weaponry dealer ?


Here are a couple of websites we are aware of to help you locate a Windham Weaponry dealer.

National Firearms Dealer Network:  http://www.nfdnetwork.com/manufacturer.windham

Gallery of Guns:  http://www.galleryofguns.com/Retailer/default.aspx

Also, we are planning on adding a dealer locator to our website in the near future.




Karen Fogarty, Asst. to VP Sales & Marketing








I recently purchased the Windham Weaponry MPC model AR 15 from Cabela’s and wanted to thank you for giving part of the proceeds to the Wounded Warriors Outdoor Recreation Program and for etching the American flag on the side of the gun.

I did quite a bit of research before I bought this particular gun and based on the reviews it appears to be a very high quality firearm. However, I couldn’t pass up the opportunity to support an organization that supports our troops and obviously loves America.

I look forward to shooting my new gun for the first time this week with my daughter. Thank you again for caring about those who sacrificed so much for our freedoms.

Joe S.


I just wanted you to know. my 308 SRC is the greatest gun I have owned since my grandfather’s M1 Garand. I LOVE THE GUN!!!!!!! HOLY MACKEREL, AN AR IN 308. AND MADE HERE IN THE GREAT STATE OF MAINE!!!!!!!!!!!!  I have an old A2 rifle (Bushmaster) that you made in 223. Great gun also. Great quality in both weapons.

YOU GUYS AND GALS ARE AWESOME!!!!!!!!!!!!!!!!!!!!!!

Anthony T.


To send Newsletter comments or suggestions, contact:



Matt H - Retail


Matt Hasty – Retail Sales Manager




Price: $ 29.95

This Windham Weaponry Lower Parts Kit was designed to give the AR Builder everything needed for those who want to add their own custom trigger & hammer. Assembled from all highest quality parts, this kit includes: AR Safety Selector Lever; Safety Detent; Safety Detent Spring; Bolt Catch; Bolt Catch Spring Pin; Bolt Catch Plunger; Bolt Catch Spring; Magazine Catch; Magazine Catch Spring; Magazine Catch Button; Takedown/Pivot Pin Detents (2); Takedown/Pivot Pin Springs (2); Pivot Pin; Takedown Pin; Trigger Guard (Aluminum); Trigger Guard Spring Pin; Hammer/Trigger Pins (2); Pistol Grip; Pistol Grip Screw; Pistol Grip Washer; Buffer Retainer; Buffer Retainer Spring. All parts made in the U.S.A.



Todd C

Todd J. Coons, VP Law Enforcement & International Sales

What’s New in LE


I hope everyone is enjoying their summer.
I would like to thank those of you that made your way to Baltimore for the National Sheriff’s Association Convention and for coming by the Windham Weaponry booth. I know the traffic at the show was down a bit, but I still made some amazing contacts. I would like to thank Henk Iverson and James Sanchez for coming by the booth, and for taking the time to work with WW in the future.
For those of you that might not be familiar with Henk, check out these two links: http://www.henkiversontraining.com/#!our-team/c4nz
Here is an update on our Armorer’s Course being held here at the factory in August. The class is full at this time and because of the overwhelming interest I had to increase the class size. For those of you that were not able to get into this class, please keep an eye on the training section of our website for announcement on future classes. The next class here at the factory is going to be in November so if you would like to attend please go to the link provide for additional information http://www.windhamweaponry.com/le/training.asp

I will be attending the Connecticut SWAT Challenge August 18th and 19th so if you plan to attend please come by the Windham Weaponry booth to say hello:  http://www.ctswatchallenge.com

Stay safe out there,


Todd J. Coons

Vice President, Law Enforcement & International Sales 

Windham Weaponry on AR15.com
AR15.com Logo
    We regularly respond to questions and topics on this informative website.


Contact Us:


Windham Weaponry, Inc.
999 Roosevelt Trail / PO Box 1900


Windham, Maine  04062   U.S.A. 
Tel: 207-893-2223
Fax: 207-893-1623


Phone Sales/Customer Service:
Toll Free: 1-855-808-1888




Your feedback is always welcome. Feel free to send us photos of how you enjoy using your Windham Weaponry rifle. We would love to hear from you. Please contact us through  www.windhamweaponry.com  or


Windham Weaponry Logo